Sentence examples for mean friction coefficient from inspiring English sources

In tribological tests, results indicate a significant improvement in the lifetime, mean friction coefficient, and friction 'noise' of the films.

But also the abrasion curve is more stable, mean friction coefficient is lower, and abrasion crack is also narrower, compared to TiN permeation layer.

The mean friction coefficient changes from μ≈0.16 without electric current and magnetic field to μ≈0.26 with them, and its variation reduces considerably.

The ratios of the amplitudes of forces in tangential and normal directions of AC components are above unity, which is much larger than those of DC components, i.e. mean friction coefficient.

The results indicate that the tensile and compressive strength of EVA is about 4.65 MPa and 9.44 MPa respectively, while its mean friction coefficient is very small, only about 0.23.

The mean friction coefficient and wear volume are reported in Fig. 5.

It obviously indicates that the average friction coefficient increases with b/R, which explains the geometric meaning of the transition.

The average friction coefficients in the parallel and perpendicular directions were 0.0422±0.0007 and 0.0331±0.0022, respectively.

The geometric moments of each distribution were used as input parameters inside the "AschFlow" model   Lognormal parameters Geometric moments     Mu Sigma Mean Standard deviation Mean + 1SD Mean - 1SD Friction coefficient −2.088 0.7310 0.1239 2.0773 0.2573 0.0596 Turbulent coefficient 5.6486 0.6302 283.89 1.8780 5.648640 15.64860.

mean wear scar diameter, friction coefficient, mean specific pressure, initial seizure load, 2.5-s seizure delay load, weld load, flash temperature parameter, mean Hertz load, pressure wear index, etc., have been determined.

The lowest mean steady-state friction coefficient of 0.015 was obtained for the a-CNx/SiC tribo-pair, while the largest mean steady-state friction coefficient of 0.09 was obtained for the a-BCN/SiC tribo-pair.