Sentence examples for mean force coefficient from inspiring English sources

As the Reynolds number increases, the Strouhal number, the mean force coefficient and the RMS of coefficients increase, and they all show the same variation tendency.

Also presented are the mean force coefficients and Strouhal numbers on rectangular cylinders.

Model scale mean force coefficients obtained in the wind tunnel and available in the literature tend to overestimate those from the full scale tests.

Mean force coefficients for level 8 are always higher than all the other levels due to edge effect at top levels.

Results are presented for the mean force coefficients, surface pressure coefficients and Strouhal numbers on a square section cylinder at varying angle of incidence.

The mean force coefficients (C d ), mean-square deviation of drag and lift coefficients (( C^{prime}_{d} ) and ( C^{prime}_{l} )), and normalized shedding frequencies (Strouhal number St) are given in Table 1.

The results show considerable changes of the mean force coefficients with Reynolds number ReD and spin parameter SP, which can be attributed to the altered boundary layer separation.

In the rotating-state, considerable changes of the mean force coefficients with Reynolds number ReD and spin parameter SP occurred, which can be attributed to the altered boundary layer separation.

Mean force coefficients for various cladding arrangements are reported for models of a 10-storey structure for two plan aspect ratios (1 1 and 3 1) in smooth, grid turbulent, and boundary layer flow.

Typical stochastic properties, such as the turbulence-induced smoothing of mean force coefficients, the non-stationary energy decay of buffeting action in the inertial subrange of turbulence, and the cross-correlations due to the non-homogeneity of the wind, are retained.

The neighboring building height ratio had significant effects on the largest mean panel force coefficient but only slight effects on interference factors.