Sentence examples for mean calibration factor from inspiring English sources

To date, wave forecasting uncertainty is usually corrected by using either the mean calibration factor or the time series method.

Soil microbial biomass carbon and nitrogen contents were measured using the chloroform-fumigation method with a mean calibration factor kC of 0.38 (Vance et al. 1987a, 1987b).

By this mean, calibration factors for each fluorescence-to-transmittance ratio measurement in each detection channel can be determined.

Here, the user-defined coefficient means a calibration factor, which was uniquely determined by collecting a certain number of calibration data (the relationship between gravity and tilt) with a least-squares method (Micro-g LaCoste, 2008).

This means that a calibration factor should be determined each time when one of the parameters, such as the width or the number of energy windows for multi-gamma emitters or the acquisition duration, is changed.

It means that the calibration factor is a global scaling factor; thus we can obtain the factor by measuring and reconstructing a point source that is almost attenuation free.

The base accident frequency predicted by SPFs is multiplied by CMFs for accounting differences between base and site-specific conditions; Calibration Factor (Cx): factor multiplied to the mean accident frequency predicted by the SPFs for considering both the differences between jurisdictions and the periods of SPF development and application.

and, Δ σ=(σ m −σ b ), Δ ε=(ε m −ε b ), and β=f(S V,Y) is an empirical calibration factor that is meant to compensate for the error due to the use of cylindrical model.

This means that different calibration factors can be observed, e.g. at 90 or 100 MHz in the FM band [ 28].

Numerical results indicate that the calibration factor, defined as the ratio of the mean bubble velocity to the average measured value, depends only on the relative bubble velocity fluctuation, if the probe spacing is about 0.5 2 times the bubble diameter.

To obtain a calibration factor between tidal impedance change (∆Z) and VTe, the mean VTe during 4 breaths at the initial PEEP level was divided by the mean global tidal ∆Z during the same breaths.