Sentence examples for mean amplification factor from inspiring English sources

We then derive the mean amplification factor ({text{AF}}_{0} left( {theta,T_{i} } right)) and associated initial variability (sigma_{0} left( {theta,T_{i} } right)).

The average S-wave velocities at the considered depths are plotted against the mean amplification factors in Fig. 8.

We used average amplification factors at frequencies between 0.4 and 10 Hz (Fig. 12).

Therefore, an average PGA amplification factor of 1.5 is assumed.

The lowest average SNR for the NW channel under the given fading factors (β=m=1) means that the required amplification factor for a target average SNR for a system operating over this channel will be higher compared to that of RW or NW channels.

Secondly, the amplification factor of mean free surface elevation inside the oscillating water chamber and the phase lag between time series of free surface elevation outside and inside the water chamber were analysed.

Therefore, it was decided to select real accelerograms, corresponding to near-source rock recordings, with a wide range of spectral contents, and derive the geometrical mean of the amplification factors obtained for each accelerogram.

amplification factor at short period (computed as the geometrical mean of AF for periods equally spaced on a logarithmic axis in the range [0.1 s, 0.2 s]).

amplification factor at mid-period (computed as the geometrical mean of AF for periods equally spaced on a logarithmic axis in the range [0.75 s, 1.5 s]).

The results of steady state mean square response analysis are presented in terms of the corresponding amplification factor, illustrating its dependence on excitation/system bandwidth ratios and detuning between expected excitation frequencies and the system's natural frequency.

Hence, an expression for the average SNR is derived (in terms of relay amplification factor).