Sentence examples for maximum volumetric loading from inspiring English sources

In winter (sewage temperature of 21 ± 1 °C), the maximum volumetric loading rates for organic conversion, nitrification, and denitrification were 2 kg COD/(m3·d), 0.39 kg N/(m3·d), and 0.35 kg N/(m3·d), respectively.

The measured viscosities of Al2O3 (80 nm) and deionized water (DIW -based nanofluiDIW -basedso founanofluidsease by nearly 82% for the maximum volumetric loading of 5% nanoparticles [20].

For that maximum TBOD5 volumetric load that can be applied, a very reasonable consumption value of 1·0 kg O2/kg TBOD5,eliminated was obtained.

Despite a similar pattern for dependency of reaction rate on volumetric loading at all temperatures tested, the magnitude of reaction rate was influenced by temperature, with a maximum rate of 0.075kgm−3h−1 observed at 35∘C.

where SWCmin (0.04) and SWCmax (0.49) correspond to the minimum and maximum volumetric SWC values, respectively.

The maximum volumetric power density that micro-monolithic SOFCs could achieve was estimated, based on the closest triangle packing; the results are shown in Table 1.

Moreover, the assembled device exhibited a maximum volumetric energy density of 4.05 mWh cm−3 and a maximum volumetric power density of 268 mW cm−3.

Furthermore, the maximum volumetric power density achieved was 123.2 ± 27.5 mW m−3.

Maximum volumetric conversion rates for nitrogen and phosphorus were respectively 0.17 and 0.24 kg (m3 d)−1.

In continuous mode, the maximum volumetric biomass productivity was 0.19 dry g L−1 day−1.

Maximum volumetric energy (power) density of the supercapacitor reaches 38.65 mWh cm−3 (8.26 W cm−3).