Sentence examples for maximum voltage is from inspiring English sources

As can be seen, maximum voltage is tracked by an MPPT controller.

We found that there is an optimal hydraulic retention time value at which the maximum voltage is generated: 0.41 d.

In this sample, because of electric discharge during electrospinning, there was no possibility for spinning at 9 rpm although, in this case little solvent evaporation could be seen; however, with regard to weakness of spinneret electric field, the maximum voltage is applicable.

Malakootian et al. (2011) in Iran, in a study aimed at producing electricity through simulated food industry wastewater treatment using two-chamber MFCs and nafion membrane, concluded that the maximum voltage is produced in the oxygen concentration of 4 5 mg/L (Malakootian et al. 2011).

Due to the large anion intercalation into the graphite positive electrode, the possible charging potential can be raised to around 5.3 V against the Li/Li+ electrode, which is a higher charging voltage than lithium-ion batteries (maximum voltage is around 4.3 V vs. Li/Li+).

In such a situation, the voltage increases considerably and it is not possible to evaluate higher concentrations of He because the maximum voltage is reached and then the fixed current (80 mA) cannot be achieved.

For current density ⩽0.1 μA/μm2, the maximum voltage was about 10 V per barrier, which is to our knowledge more than for any reported HBV material.

Maximum voltages are 3.8 kV for the MCP and 4.1 kV for the analyzer, respectively.

Higher maximum voltages were produced using domestic wastewater (COD = 390 ± 89 mg L−1) with brush anodes (360 ± 63 mV, 1000 Ω) than woven carbon mesh anodes (200 ± 81 mV) with one or two separators.

The capacitance was calculated by the equation C = 2I · t d / [(U m−ΔU) · m], where I is current of charge/discharge, t d is time of discharge, U m is maximum voltage, ΔU is voltage drop of short circuit of discharge circuit, and m is weight.

The maximum permissible voltage is defined as the maximum voltage per unit length at which the YBCO coated conductors (CC) do not suffer from critical current (Ic) degradation or burnout.