Sentence examples for maximum visible from inspiring English sources

At our maximum visible light intensity of 10 W cm 2 in air, the Al NCs/γ-Al2O3 catalyst surface temperature reached upwards of 175 °C as shown in the temperature profile map of the catalysts surface in Fig. 3a.

The average steady-state surface temperature of 175 °C (Fig. 3b) under illumination at our maximum visible light intensity of 10 W cm 2 is below the 200 °C onset temperature of product formation in thermal-driven rWGS (Fig. 3d) but achieves a significantly higher overall reaction rate.

For maximum visible root length at day 35 and day 42 R2 was 62 and 60%% respectively.

It is noted that the composite synthesized adding 50 ml of THT (Fig. 5 (d)) has an intermediate IR absorption in comparison with Fig. 5 (b), (c) and maximum visible absorption at 410 nm.

As the angle increases from 0° to 30°, the maximum visible depth increases from about 0.3MFP to 1MFP (MFP = 2.8mm).

After tumour localization, the volume of CTp imaging has to be positioned to include the maximum visible area of the tumour and an adequate arterial vessel.

Several metallic NPs, such as gold and silver, exhibit a characteristic absorbance maximum in visible range, namely surface plasmon resonance (SPR).

Since the maximum possible visible range for one SV by the receiver is 153 o, according to the constellation shown in Figure 6, the visible region denoted by the central angle can be obtained.

As for the PVB/X-GRL NFM (Fig. 2b), their exhibits a wide absorption peak from 400 600 nm and the maximum absorbed visible light is under λmax = 573 nm.

In our analysis, we assume that the receiver has the maximum possible visible region, i.e. α = 153 o as shown in Figure 5 in Appendix 2, in all of the six orbital planes, i.e. that the receiver experiences the maximum possible Doppler shift from each one of the six orbital planes at the same time.

Shown in Figure 4 is the JS divergence along the XAR wherein at least 5 6 divergence peaks (local maxima) are visible.