Sentence examples for maximum toughness was from inspiring English sources
Keeping the layer thickness ratio of about 10 and increasing the number of layers, the bending strength decreases slightly, and a maximum toughness was obtained at N≈30.
Comparison of zone sizes leads to the conclusion that maximum toughness is achieved when the particles are large enough to cavitate a long way ahead of a notch or crack tip, but not so large that they initiate unstable crazes and thus reduce fracture resistance.
The maximum toughness obtained was very high (impact strength more than twenty-fold that of the PBT PAr matrix).
The maximum bending moment and the flexural toughness was determined for 26 specimens by using different types of grids.
Investigation of the effects of the relative thickness of the layers and of the number of layers revealed that the maximum crack shielding and the maximum apparent fracture toughness were achieved in three-layer composites with the thickness of the compression layer constituting one-half of the specimen height with an edge crack extending to the first interface.
His toughness was impressive, but the results were not.
The question of toughness was raised.
More toughness was immediately needed.
The fracture toughness was 0.22 MPa·m1/2.
There is an optimum amount of VTPCL and an optimum weight ratio of VDC/MMA for which the toughness is maximum.
The test results show that subcritical propagation occurs during the loading progress from the initiation load to the maximum load, and the initiation toughness is about 80% 85% of the fracture toughness of the corroded concrete.
