Sentence examples for maximum tested loading from inspiring English sources

Results demonstrated enhanced nitrification in the aerated bed with 99% mass removal up to the maximum tested loading rate of 10.1 gNH4+-N/m2/d.

This repeatability test represented a 4.5 fold increase in desired maximum validation testing load, and was also used to assess the durability of the device under extreme loading conditions.

The initial training intensity was set between 70%and80%0% of the value obtained in the one repetition maximum test, and the training load was constantly adjusted to maintain the maximum repetitions.

After testing maximum load, yield load, stiffness and displacement were analyzed.

Under the same (maximum) load, constant load tests exhibit higher displacements, residual depths and friction coefficients, but lower percent elastic recoveries.

The walls simulated the bottom three stories of a 10-story prototype building; loading apparatus available at the University of Illinois, Network for Earthquake Engineering Simulation laboratory were used to simulate the load demands, permitting maximum test-specimen scale and realistic demand patterns.

Table 3 Results of maximum loads in load transfer tests normailized by nominal tensile strengths of strands.

For that purpose a four-point bending test, torsion tests, fatigue tests and a physical check including maximum load testing were conducted.

The average accumulated number of AE signals and corresponding micro cracks for the anatomical SGFR fiber post (153.0 hits and 2.44 cracks) were significantly lower than those for the commercial FRC post (194.7 hits and 4.78 cracks) under 40% of the static maximum resistance fatigue test load (pass 1.2×106 cycles).

The test conditions were the following: static load of 213 N, motion speed of 30 mm/s, and maximum test duration of 1.0 × 10 cycles.

Sandbags are stuffed into the Frog Hopper ride's big midcroak mouths in a maximum load test.