Sentence examples for maximum tensile strain from inspiring English sources

a Distribution of maximum tensile strain.

The maximum tensile strain exceeded 2.5%, and the tensile strength was approximately 4.3 MPa.

Here, the maximum tensile strain was 30% due to the mechanical limitation of the stretching equipment.

Thus, the probability of the maximum tensile strain surpassing 3.65e−4 is 0.02.

The CDF computed up to the maximum tensile strain of 1.865e−3 is 0.98.

Using a maximum tensile strain criterion, the effective tensile strength was found to be 104MPa±14MPa.

The maximum tensile strains occurred at the bottom rebar, while compressive strains occurred at the top rebar.

At a mud weight of 50 MPa, the CDF for the maximum tensile strains ranging from 5.07e−5 to 1.37e−3 is 0.98, measured from 5.07e−5 to 3.65e−4.

The maximum tensile strains of the polymer and composites are in the range of 5 93%, and their maximum torsional strains vary from 0.26 to 0.90.

There was no rupture or instability and at failure the core plates achieved maximum tensile strains between 3.2% and 4.2%.

For instance, given a mud weight of 15 MPa, there is an occurrence of maximum tensile strains within the range of 3.24e−4 (minimum) and 8.027e−3 (maximum) (Fig. 16a and Table 5).