Sentence examples for maximum tensile and from inspiring English sources

The maximum tensile and flexural strengths of the composites were obtained at 25% fibre loading.

It is shown that for eccentric connections, the flexural bending largely affect the maximum tensile and compressive stresses within the joint.

Results: The results indicate a linear relationship exists with both maximum (tensile) and minimum (compressive) strain patterns relative to incremental load placement on the intact maxilla.

In torsion, the maximum tensile and compressive stresses induced by a state of pure shear are oriented at ±45° to the axis of rotation.

When tested at room temperature (RT), the maximum tensile and flexural strengths were recorded for the hybrid composites with the 5% alkali-treated P. purpureum fibres.

The maximum tensile and bending strengths of the as-obtained W/Cu joints are ~ 172 and ~ 232 MPa, respectively, which reach a very high level compared to pure copper.

The maximum load of the supraspinatus tendon was measured, and the maximum tensile stress and elastic modulus were calculated.

Chitosan films have shown values of 50 MPa and 45% for maximum tensile strength and tensile elongation, respectively.

The contribution of the fibres was clearly highlighted through this experimental study, a strong relationship between the bond performance and both the maximum tensile strength and strain ductility of UHPFRC was noted.

For arc and trapezoidal Bridge, the maximum tensile stress and shear stress are both in the inner corner of contact area between cap and PZT (lead zirconate titanate) disk.

where F and D represent the maximum tensile resistance and diameter of the section of the root, respectively, which were tested using a stress recorder and vernier caliper in the field.