Sentence examples for maximum temperature required from inspiring English sources
A study conducted by Fisher (2007) on some specific reservoirs showed that in oil shale the desired temperature was 550 °C (for this case) and the input heat required was 153 kWh/ton, and in oil sand the maximum temperature required was 300 °C and input heat requirement was 123 kWh/ton.
In order to determine the optimum temperature required for maximum production of the fungal enzyme, the culture media containing different carbon sources and the fungi were incubated at two different temperatures (28 and 40°C) up to 6 days.
Where the temperature required to the maximum rate of color removal tends to correspond with the optimum bacterial growth temperature of 30 °C (60.3%).
The compaction temperature required to achieve the maximum tensile modulus was seen to increase with increasing draw ratio.
The highest temperature required to burn off coke was observed for 13CuNi ZrO2, with a CO2 evolution maximum at 700 K, while 11CuNi ZrO2 exhibited the lowest carbon oxidation temperature with a CO2 evolution maximum at 650 K.
However, the weather of the city of Durango is ranked as BS in the Köppen classification, where the minimum and maximum ambient temperatures require the use of cooling and heating systems.
It is found that the maximum temperature of 530 °C required by the oxygen production step in the Cu Cl cycle can be supplied by current solar thermal technologies.
It is motivated by the fact that these mirrors are subjected to high thermal loads, e.g., neutron fluxes, that lead to maximum temperatures above the required maximum operational temperature of 450 °C for the material (SS 316L(N -IG).
Cooler temperatures required longer periods.
It is shown how the effect of radiation is to ameliorate the steep gradient and maximum temperature and to increase the length required for 99% conversion.
However, due to the higher compression ratio and maximum temperature in the cycle, an engine design based on maximum power density conditions requires tougher materials for engine construction than one based on maximum power conditions.
