Sentence examples for maximum stresses that from inspiring English sources

From these measurements we mostly focussed on identifying the most extreme conditions observed to evaluate the maximum stresses that the stone may be exposed to.

To measure the mechanical strength of the joints, an experimental testing program was designed to reveal the maximum stresses that the structure can support.

Therefore, we did not perform tests with a maximum stress that was greater than threefold the vertical stress in order to restrain pollution by extra damage.

It shows that resistance of a film to small deformations is not, necessarily, correlated with the maximum stress that can be transmitted through the film.

In previous verifications of offset placement with FEA models [15 18], the maximum stress that occurs in the peri-implant bone has been measured and compared with the observed stress distribution with straight placement.

This lack of size effect is caused by the flow stresses in the thinnest films exceeding the maximum stress that can be applied to these samples using thermomechanical loading down to −100 °C.

The LPC showed good adhesion state of the fiber matrix interface and acceptable mechanical properties with a flexural modulus and a maximum stress that can achieve 0.78 GPa and 2.84 MPa, respectively.

A parametric study indicates that the maximum stresses at the notch locations increased with the notch depth and the applied bending moment on notched cross-sections, but reduced with the thickness of the adhesive.

Additionally, in an in vivo situation, bonding systems are more likely to be challenged by repeated applications of stresses that are below the maximum stress that these systems could withstand.

Results reveal that maximum stresses obtained never exceeded the yield strength of AISI 316 stainless steel.

Based on the static behavior of three types of NPTs with the same cell wall thickness of honeycomb or the same reference load carrying capacity, it is shown that the maximum stresses in spokes and tread of a NPT are much lower than that of traditional pneumatic tires, but its load carrying capacity is higher than the latter.