Sentence examples for maximum stresses obtained from inspiring English sources

Results reveal that maximum stresses obtained never exceeded the yield strength of AISI 316 stainless steel.

The maximum bond stresses obtained from Finite Element Analysis (FEA) revealed that the models with rigid interfaces developed lower bond stresses due to the lack of relative displacements between both materials.

The maximum shear stresses obtained experimentally (1.39 3.11 Pa) for the blood analogue flows at the studied rates (6.7 25.3 L/h) evidence that haemolysis is unlikely to occur since lysis threshold values are 150 Pa for erythrocytes, 10 Pa for leucocytes and 7.5 Pa for platelets.

The maximum stress obtained in this paper can also be included in the above range, which verified our simulation results.

The maximum stress obtained in the top mast for thrust loading was 221 N/mm2 which is below the allowable limit of 227 N/mm2 (see Fig. 7).

It could also be observed from the Table 2 that the location of maximum alternating stress due to fluctuating load was different from maximum stress obtained after a static analysis.

The maximum Von-Mises stresses obtained by the pseudo-static analyses are summarized in Table 5.

In the EBR samples, a power function was able to describe a mid positioning of the experimental bond stresses (i.e. the corresponding mid-range values between the maximum and the minimum experimental bond stresses) obtained along the slips within the interface at the SS loaded end.

Rule-based magnitudes of nominal maximum longitudinal stress deviated significantly (25 39%) from comparable stresses obtained by the panel code based finite element analysis.

Fatigue analyses were carried out by using the stresses obtained from the static analyses performed with a maximum of ten loading conditions.

The liquid is firstly in contact with the crown area where the maximum stresses were obtained.