Sentence examples for maximum stressed from inspiring English sources

That is because the maximum stressed section was shifted away from the measured locations.

While, for unequal end eccentricities, the maximum stressed section could be shifted based on the end eccentricities combinations.

In all cases, the maximum stressed sections were located at the upper quarter of the tested column as depicted in Fig. 4.

For columns bent in single curvature modes, tensile strain could be developed at the mid-height section since this section is the maximum stressed section for the case of equal end eccentricities.

That can be attributed to the minimal effect of the developed bending moment at these sections, where the maximum stressed section were near the supports as depicted in Figs. 5 and 6.

Inspite that the maximum stressed section was not the same for all tested columns depending on the end eccentricities combinations, the developed normal strains on the longitudinal bars were measured at the mid-height section.

Table 6 Computed maximum stresses and stress-strength ratio.

Deflections and maximum stresses are computed using the two models.

Apart from these regions, the maximum stresses occurred mainly in the top mast component.

Results reveal that maximum stresses obtained never exceeded the yield strength of AISI 316 stainless steel.

For the retracted position, maximum stresses occur at the supporting cables.