Sentence examples for maximum stress developed from inspiring English sources

The average maximum stress developed in GFRP before debonding was 1027 MPa with a coefficient of variation (CoV) of 6%%.

This indicates that the maximum stress developed were well below the ultimate strength of both LM and HM bars.

The results reveal that maximum stress developed on coil and its support structure is below allowable stress limit.

The effect of fission product decay heat is to reduce significantly the maximum stress developed in the cladding during a beam-trip-induced transient.

Theoretical modeling and numerical simulation were performed and revealed that such thickness-dependent fracture can be attributed to the thickness-dependent maximum stress developed in the carbon coating during the lithiation of SnO2 core.

The maximum load of failure was converted to the maximum axial stress developed in FRP using Eq. (2): sigma_{db} = frac{{p_{hbox{max} } }}{{b_{f} t_{f} }} (2 where σ db  = maximum axial stress on FRP sheet at debonding in MPa, P max  = maximum load of debonding, b f  = width of FRP sheet and t f  = thickness of FRP sheet.

It is desired to estimate the values of the maximum bending stress developed in the conductors and in related fittings due to aeolian vibrations.

A total of five control-GFRP bonded prisms were tested under direct shear tests and the maximum axial stress developed in GFRP before debonding was considered as pull-out strength of each specimen.

The critical case of a pipe or tunnel in which the maximum tensile stress develops at its springline occurs when it is constructed at shallow depths in the QS layer.

The aggregation factor noticeably influences the maximum transverse normal and the maximum hoop stresses developed in the cylinder.

These values were computed based on the normal stress associated with maximum or peak shear stress developed by the specimens for each externally applied normal load during testing.