Sentence examples for maximum strength stiffness from inspiring English sources

The deformation capacities of the RC frame and strengthened frames were not significantly different, but the maximum strength, stiffness, and energy dissipation capacities were significantly improved in the strengthened frames.

The results from analytical and experimental studies for seven beam-column connection specimens tested by the authors were compared in terms of initial stiffness, maximum strength, stiffness degradation, strength degradation, and energy dissipation.

Maximum strength reduction, stiffness loss and ductility deterioration in the perforated specimens were 42%, 61%, and 33%, respectively.

Hydrothermal influence in adhesive bonded joints was observed by Soykok [18], considering the heat and moisture ageing process the maximum strength and stiffness of joints reduce by a significant value after a period of exposure at hot water.

Different outcomes were exposed, (i) utilization of lime and fly ash increases the shear strength of soil [1, 3], (ii) maximum strength and stiffness of lime and fly ash treated soil observed on the dry side of optimum moisture content [3], (iii) curing temperature (till 35 °C) increases the tensile and compressive strength, for further increment of temperature no significant influence found.

Maximum pullout strength, stiffness, energy to failure, energy to removal, and size of the resulting block damage were statistically compared among conditions.

Under uniaxial compression, the laminate without phase shift has the lowest maximum strength and tangential stiffness and the laminates with 4 mm phase shift has the highest maximum strength and the highest tangential strength.

Since tear testing includes investigating the stiffness, maximum strength and strain at break, TPU looks like an ideal candidate.

This was consistent with the tensile test results in which maximum improvements in the strength, stiffness and toughness were obtained for the 0.5 wt% MWCNT-nanocomposite.

To compare the stiffness and maximum strength between the untwisted and twisted free-tendon.

It was observed that the infills increased the initial stiffness and maximum strength and that the maximum drift in the buildings occurs always in the model without infills at the ground floor.