Your English writing platform
Discover LudwigExact(37)
The maximum strain of the deflected nanobeam and the strain of the uniformly-strained Ge nanobeam are set to 1%, 2%, 3 % and 4 for comparison.
However, due to the smaller Urad in the rest of the structure, Uc-rad of the complete volume of the deflected nanobeam (Uc-rad, deflected) with a maximum strain of 1% is slightly smaller than that in a uniformly 1%-strained nanobeam (Uc-rad, uniform), as shown in the inset of Fig. 6b.
e, Fractional change in resistance under 1,000 cycles of stretching to a maximum strain of 20%.
For example, the Urad,deflected/Urad,unstrained ratio reaches up to 104 locally for a Ge nanobeam with a maximum strain of 4% as shown in Fig. 6a.
"All systems," intoned Colonel "Shorty" Powers, the voice of the Manned Spacecraft Centre, "are A-Okay… at 40 seconds... at 55 seconds," by which time Cooper had taken the maximum strain of air pressure.
The maximum strain of 0.7%, at 120 mmHg, remained un-critical considering a typical high-cycle recoverable strain of 2%.
Similar(23)
Pseudoelastic shape memory alloys of NiTi-type can be reversibly deformed up to maximum strains of 8%.
The model predicts 8.23% shortening and an average curvature of 0.294 ± 0.26 cm−1 in the vessel after knee flexion, with maximum stresses of 61.17 kPa and maximum strains of 0.16%.
Meanwhile, the maximum strains of the retrofitted specimens ranged from −0.00151 to −0.00170, exceeding their yield strain of −0.0015.
The percentage increases in maximum strains of cortical bone surrounding implant in the orthotropic case were up to 7.6% compared to those in the effectively isotropic model but those were up to 115.4% on the cancellous bone surrounding implant.
The line of maximum strain for both the metallic and polymeric reinforcement exhibited bilinear behaviour as expected.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com