Your English writing platform
Discover LudwigSuggestions(5)
Exact(6)
As expected, the maximum strain for the top mast occurred on the farthest side, in line with the load direction.
The line of maximum strain for both the metallic and polymeric reinforcement exhibited bilinear behaviour as expected.
Increasing curing time and temperature led to increased tangent modulus and decreased maximum strain for solid constructs.
Therefore, an iterative scheme needs to be implemented where the soil properties are updated based on the strain level until the maximum strain for all layers converge.
The MCNT obtained by the strengthening of the F4 matrix showed a maximum strain for a concentration of 20 wt.% of multi-walled carbon nanotubes.
In general, good agreement was observed between simulated and measured strains and the line of maximum strain for both the metallic and polymeric reinforcements exhibited bilinear behaviour as expected.
Similar(54)
The aforementioned studies placed the imaging probe parallel to the RF electrode when performing electrode-displacement strain imaging for monitoring RFA to measure the maximum strain of the tissue for imaging (the angle between the imaging transducer and the RF electrode should be as small as possible).
Figure 5c illustrates the resistivity curve for the sensor, with a maximum strain of about 28%.
The following crack initiation parameters were evaluated; the strain-life parameter, the maximum strain corrected for strain ratio effects, the maximum principal strain corrected for principal strain ratio effects, the Smith Watson Topper (SWT) parameter, the critical plane SWT parameter and the Fatemi and Socie (F S) parameter.
Maximum strain evolutions for shear reinforcement measured at regions around the bends were observed to be lower than the strain evolutions observed in the longitudinal reinforcement.
Performance functions are set up based on displacement ductility and maximum strain limit-states for reliability estimation.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com