Sentence examples for maximum strain at from inspiring English sources

With poor interfacial stress transfer, the ns value will be lower, leading to a less strained graphene island and a lower maximum strain at the island center.

The maximum strain at the peak strength of rock salt (halite) is much greater than those of the other three rocks.

We can conclude that the three decellularization agents preserved the collagen structural network, anisotropy and the tensile modulus, tensile strength and maximum strain at failure of native tissue.

With this method, predicted or measured spatial average vibration velocity and theoretically derived strain factors are used to estimate maximum strain at the ends of pipes.

The maximum strain at the two ends of the top surface of the deflected nanobeam is equalized to the one at the bottom surface of the nanobeam at the plane of symmetry by adjusting the curvature of the fillets connecting the Ge nanobeam to SiO2 supports as shown in Supplementary Fig. 1.

Although the encapsulation is incomplete, maximum impact strength and maximum strain at break in tensile test can be obtained when certain combinations of SEBS-gMA and SEBS are used.

Therefore, the maximum strains at the first appearance of a crack on the imaged sheet surface (crack initiation) and the corresponding applied tool displacements are shown in Table 3 as (bar {varepsilon }_{text {init}}) and |U y |init, respectively.

The minimum strain was also observed at 5 mm (0.00074), while the maximum strain occurred at 6 mm (0.0035).

The maximum strain measured at failure is similar to the compressive strain determined from the coupon test indicating the effective utilisation of the GFRP material.

They contribute to the reduction of stress intensities, which results in increasing both fatigue life and maximum strain ɛmax at failure during fatigue loadings.

The results indicated that the maximum strain amplitude at the contact interface was an important parameter for fretting fatigue crack initiation.