Sentence examples for maximum static adsorption from inspiring English sources

The maximum static adsorption capacity of the sorbent at optimum conditions was found to be 44.01 mg of Fe(III) per gram of sorbent.

The maximum static adsorption capacities of the DMIPs and NIP sorbents for the nine phthalate esters were 281 and 132 mg/g respectively, and the results of dynamic adsorption showed that the adsorption equilibrium could be achieved about 5 min for the DMIPs sorbents.

The binding capacity was evaluated by static adsorption and Scatchard analysis, which showed that the dissociation constant (KD) and the maximum binding capacity (Qmax) were 1.50 mol/L, and 236 μmol/g for high affinity binding site, and 7.97 mol/L and 785 μmol/g for lower affinity binding site, respectively.

To fully reveal the potential of the adsorption of BPA by PCN-222, the static adsorption of BPA with high concentrations were performed.

A series of static adsorption experiments were conducted to analyze its adsorption performance.

For these films, maximum static water contact angle was 164°.

Meanwhile, a comparison between this model and the static adsorption model was made.

b The static adsorption of TCH.

Figure 6b shows the static adsorption of TCH.

The maximum bed loading capacity for 1 mg/L Cr VI) filtration at the breakthrough point was found to be 16.5 mg-chromium/g-chitosan, higher than the static adsorption capacity of 11.0 mg-chromium/g-chitosan using nanofiber mats, indicating the membranes' better potential for dynamic adsorption.

In this section, the results obtained from static adsorption tests and the relationship between polymeric adsorption parameters are introduced.