Sentence examples for maximum sliding distance from inspiring English sources

The results show that the maximum sliding distance of our transduser is 21.8, 26.5 and 30.6 mm with corresponding initial accuracies of 1.2, 2.3 and 3.3 mm, and the dynamic ranges are 0 20.6, 0 23.2 and 0 27.3 mm.

According to the observed slide time of about 2 minutes and the maximum sliding distance of about 117 m, based on Newton's Laws of Motion it can be simply estimated that the maximum speed of movement of the rocky landslide was about 2 m/s.

The wear tests were conducted on the 20 μm thick MPP CrN coatings using different ball materials (α-Al2O3, WC Co, AISI 440C steel, AISI 302 steel, 100Cr6 steel, and brass), different applied loads (5 40 N) and sliding speeds (5 50 cm/s) for a maximum sliding distance up to 10 km.

The evaluation of the friction coefficient with the number of cycles (sliding distance) was assessed at different temperatures and the wear rates of the coatings and balls were determined; the maximum testing temperature was 800 °C.

The expressions for various representative sliding distances such as the significant sliding distance are also derived.

The factors considered are sliding velocity, sliding distance, normal load and mass fraction of ZrB2 particles.

The parameters which influence dry sliding wear rate are applied load, sliding distance, sliding velocity and reinforcement.

The factors selected for investigation were temperature, load and sliding velocity keeping sliding distance constant.

The operating wear mechanisms at 823 K are adhesion at shorter sliding distance and tribo-oxidation at longer sliding distance.

The effects of sliding speed, sliding distance, test temperature and working atmosphere were studied.

Coefficient of friction decreases with increasing applied load and sliding speed whereas it increases with increasing sliding distance.