Sentence examples for maximum shear stiffness from inspiring English sources

Mechanically, the implants treated with PTH showed no significant differences in total energy absorption, maximum shear stiffness, or maximum shear strength.

Maximum shear stiffness (MPa/mm) was obtained from the slope of the linear section of the load-displacement curve, and total energy absorption (J/m) was calculated as the area under the load-displacement curve until failure.

These patterns were more similar between macaques and baboons for density, maximum elastic and shear stiffness, and anisotropy than between either of these and humans.

Conclusion: These results indicate that the maximum shear stress and stiffness of the rat molar PDL decrease between 2 and 24 months of age; but its toughness remains unchanged due to an increase in the extensibility.

Maximum shear strength (MPa), apparent shear stiffness (MPa/mm), and energy to failure (J/m2) were calculated from the recorded load-displacement data.

Open image in new window Fig. 16 Relationship between maximum bond strength and shear stiffness.

In addition, bond strength could be calculated with maximum bond strength and shear stiffness relationship (see Fig. 16).

These parameters were maximum shear strength (in MPa), apparent shear stiffness (in MPa/mm) and total energy absorption (in J/m).

Furthermore, columns C-Cross, C 2 IPE, and CB 200 showed the best performance with regard to stiffness, the maximum shear strength, and energy absorption capacity, respectively.

Raloxifene-treated allograft reduced early implant fixation compared to untreated allograft, as measured by inferior maximum shear strength (p < 0.001) and apparent shear stiffness (p = 0.001).

From Eq. (6), it is obvious that the maximum interfacial shear stress depends on shear stiffness of adhesive layer the most followed by concrete compressive strength, whereas FRP stiffness has the least effect on maximum shear stress.