Sentence examples for maximum removal for from inspiring English sources

Hence, the maximum removal was achieved at pH 8. Nurul-Amin et al. (2006) also reported that maximum removal for As V) was observed in comparative neutral region, i.e., 8. Open image in new window Fig. 8 Removal efficiency showing the effect of pH in 5 cm column at 7 mL/min for 15 ppb As V) concentration.

The optimized conditions for maximum removal of cresol for biosorption were, Initial feed cresol concentration 467 mg/l, pH of the feed 6.44, biosorbent dosage 1.11 g, time 5.25 days and agitation speed of 195 rpm for biosorption, and that for biosorptive foam separation were liquid pool height 28.38 cm, surfactant concentration 0.29% and airflow rate 1.8 lpm.

The maximum removal of Zn2+ for untreated rice husk and NaOH-treated rice husk after 150 min was 52.3% and 95.2% at optimum pH of 3.5, respectively.

Optimum operating treatment time was determined for maximum removal of these impurities by running the experiment for 24, 48 and 72 h, respectively.

Box Behnken design was applied for optimization of nanoemulsion compositions for maximum removal of EBT.

Finally, after checking for possible outliers, the optimum conditions for maximum removal of Pb II) from aqueous solution were obtained.

But 0.20 g/100 mL of CAC required for maximum removal of 75.42 % lead.

However, 0.20 g/100 mL of CAC required for maximum removal of 75.42% lead.

Numerical optimization applying desirability function was used to identify the optimum conditions for maximum removal of fluoride.

In order to estimate the sorption capacity of MBC1 and MBC2, it is important to determine the equilibrium time for maximum removal of heavy metal ions.

A central composite design (CCD) has been developed for maximum removal of TPA, BA, p-TA, COD and minimum consumption of energy.