Sentence examples for maximum reduction factor from inspiring English sources

The reduction in the radiotoxicity of the spent fuel after one or two recycling in a BWR is however very small for the studied MOX assemblies, reaching a maximum reduction factor of 2.

t/t 0 = 1/4 causes the maximum reduction in stress concentration factor and the t/t 0 = 4 has minimum reduction, as Fig. 9 shows.

Laser annealing reduces the dark count rates further in all samples with the maximum dark count rate reduction factor varying between 5.3 and 758 when operating at (80^{circ}mathrm{C}).

Because of accruing the stress concentration around the hole to achieve the maximum reduction in stress concentration factor, piezoelectric actuators should be placed near the hole.

Therefore, the piezoelectric patches should be placed at this point to achieve the maximum reduction in stress concentration factor at all points of the plate.

It shows that curves R = 1.2r, theta = 45 at 90° have minimum stress and therefore have a maximum reduction in stress concentration factor.

The results show that the stiffness ratio and thickness ratio of the host plate and piezoelectric patches affect the best location of actuators to reach the maximum reduction in stress concentration factor.

Open image in new window Fig. 6 Maximum reduction in stress concentration factor for various Rs. Figure 7 shows longitudinal stress around the hole on the host plate for a thickness ratio smaller than one.

This curve (theta = 75) causes a maximum reduction in the stress concentration factor, but high stress can be observed around 68°.

The curve (theta = 75) has the maximum reduction in the stress concentration factor; however, at a range of point 60°, high stress can be observed.

The curve theta = 60 at 90° angles has the minimum value of stress and results in the maximum reduction in the stress concentration factor.