The maximum recorded wire displacement with 884 and 1274 N of pretension was 2.76 and 2.99 mm, respectively.
The 'indirect' method (from the maximum recorded force as a function of the embedded length) and the calculation from an individual force displacement curve yielded very similar results.
The displacement ductility ratio is defined as the ratio of maximum displacement recorded prior to exceeding 20% strength decay under cyclic loading, to the yield displacement. Figure 4 depicts the definition of the displacement ductility ratio and equation number one may derive it.
The software automatically recorded maximum displacement in millimetres.
The maximum CO2 recorded was 550 ppm.
The maximum height recorded was 30 m.
The JMA displacement magnitude is determined from the logarithm of the maximum displacement amplitude recorded with seismographs of natural period 6 s and damping coefficient of 0.55.
Maximum shear strength (MPa), apparent shear stiffness (MPa/mm), and energy to failure (J/m2) were calculated from the recorded load-displacement data.
The maximum amplitude of ground displacement recorded by a short-period seismometer at station JMAB which is operated by JMA Sapporo was 2.4 μm for the first tremor and 0.5 μm for the second.
GS displacement has been recorded maximum for the model S2 and h2 due to lesser stiffness caused by the absence of infill walls in that storey.
