Sentence examples for maximum reachable from inspiring English sources

Since the maximum allowed force for penetration is the weight of the lander/rover on their targeted planetary surface, our results put a strong constraint on the maximum reachable depth without endangering the whole mission.

The sample holder, which was developed to closely resemble a micro plug-flow reactor, poses some problems in terms of heat transfer to the outer body of the cell (limiting then the maximum reachable temperature) and of the correct measurement of the actual sample temperature.

F ( x, u ) = C u - C x u - x ∑ u C u - C x u - x { bilateral weights }.       Sbest ← Smax {Smax is maximum reachable value for S}.       for d = ⌊dmin⌋ to [dmax] do.

We have chosen to expand the width of the corridors considering the comparison among sizes of 2.4 m, 3.6 m and 4.8 m. Figure 10 represents the three different fundamental diagrams in case of groups: these results are in tune with the above mentioned theory about the dependency between maximum reachable flow and the width of a corridor.

The DRDC is also looking to determine "simulation analysis of maximum reachable target speeds," which is important information to get when you're trying to destroy things from the sky.

Single values were summed up with the maximum reachable value set to 100%.

Results suggest that contaminant properties, especially polarity, significantly influence the maximum temperature reachable during the heating processes and the contaminant removal kinetics.

They had to position the planar surface at the maximum distance reachable with the rod, that is, such that it coincided with the distal end of the rod.

It was demonstrated experimentally that the tuning of the cell dimensions of the composite morphology influences the percolation threshold and the reachable maximum conductivity and reinforcement.

The single wire number W11, is recognized for SNRn values above 100, as required by ISO/DIS 10893-7, the maximum contrast sensitivity reachable with this calibration is W14.

Based on thermodynamic calculations, including Al, Fe, Cr, Zn, Ti, Mg, Si and Cu, model alloys exhibiting a maximum variation of the reachable solute super-saturation of elements relevant for precipitation hardening within the compositional limits of AA6061 were produced.