Sentence examples for maximum power loads from inspiring English sources

The results have shown that sapphire which is suitable for the spectral range from 150 nm to 4.5 μm is the only material for large window diameters (about 13 cm) which could cope with the expected maximum power loads for W7-X of 50 kW m−2 for more than 20 min.

First calculations show that for the most severe case of a 3 mrad beam the maximum power load (in hot spots) can be kept below 17 MW/m2.

First calculations show that the maximum power load can be kept below 15 MW/m2, sufficiently low to use conventional dump plate designs.

The maximum power load was 6000 kW and 320 kW for the reservoir and the run-of-the-river schemes, respectively.

In order to improve the efficiency of the mechanical hydraulic transmission, we select the hydraulic control target value as the maximum power load.

It is well known that these properties limit the maximum power (heat load) at which a vapor chamber can operate, due to incidence of the capillary limit.

An integrated power control method is put forward that contains maximum power point tracking, load power tracking control, over speed protection, and optimization of battery management.

After that, the overall transmission efficiency and the maximum power of the load are analysed.

The results suggest that, from the evolutionary standpoint, the human muscular system of the lower limbs could be designed to produce the maximum power output against the loads that are well below the mass and inertia of the human body.

Such generalization caused not only an overestimation in the maximum power delivered to the load resistance for cases (I) and (II), but also an underestimation of the optimal load resistance and an overestimation of device natural frequency for case (II).

Three states were analysed: open-circuit (OC), short circuit (SC), and under maximum power point (MPP) / load.