Regard to the high demand and confidence of the plants about their generations with maximum power, increasing of bidding prices does not lead to the financial loss for them and does not force them to leave the market.
Due to the high demand of market on July 24 and confidence of the plants about their generations with maximum power, increasing of bidding prices does not lead to the financial loss for them and does not force them to leave the market.
If the intensity of illumination is increased, the resulting current will change, and multiplication of the current and voltage which producing the maximum power increases.
When sunlight intensity increases, the short-circuit current, open-circuit voltage, and maximum output power increased, while the fill factor is reduced; when the increase of series resistance, open-circuit voltage of the battery remains unchanged, and the short-circuit current, maximum output power, the power conversion efficiency, and fill factor decrease [12].
When the temperature was increased to 50 °C, the maximum power density increased to 0.322 mW cm−2, which was approximately eight times higher than that based on mesophilic enzymes at the same temperature.
The polarization performances measured for test cells at 130 °C showed that the maximum power density increased with an increase in the relative humidity.
In result, the maximum captured current power increased from 120 W in case of without nozzle to nearly 475 W for utilizing NACA 0025.
When the pressure was increased from 1 to 6 atm, the maximum power density increased from 135.0 to 159.0 mW cm−2 at 650 °C, and from 266.7 to 306.0 mW cm−2 at 800 °C.
As a result, the open circuit voltage (OCV) of the cell increased from 0.452 V to 0.552 V, and the maximum power density increased from 5.5 W/m2 to 34.5 W/m2.
Simulation results are plotted in Figure 7. Basic conclusions from this set of simulations are coherent with previous simulation set. Figure 7 Results when the maximum transmission power increasing from 10 to 70.
