The phrase "maximum power available" is correct and can be used in written English.
It is typically used to describe the highest amount of power or energy that is currently accessible or usable. Example: The generator was designed to provide a maximum power available of 500 watts, but due to the high demand, it can only produce 400 watts at a time.
Cell voltage current curves were obtained using a potential sweep technique and used to determine the maximum power available from the system.
With additional signal processing, the maximum power available from the panels and the corresponding current and voltage values are also obtained.
Maximum power point tracking (MPPT) must usually be integrated with photovoltaic (PV) power systems so that the photovoltaic arrays are able to deliver the maximum power available.
The simulation results, based on PSCAD/EMTDC, show that the proposed system can provide the power factor correction, load balancing, harmonic elimination, reactive power compensation and simultaneously inject the maximum power available from the PV array into the grid.
If the available power from the wind turbine cannot satisfy the load demand, the FC system can meet the excess power demand, while the UC can meet the load demand above the maximum power available from the FC system for short durations.
It consists of a step down converter to charge a battery with the maximum power available from photovoltaic generator (PVG) and a single phase voltage source inverter (VSI) to produce a stable AC voltage (220 V/50 Hz) with lower total harmonic distortion (THD).
where are the Lagrange multipliers corresponding to the linear constraints on the maximum powers available in relay nodes.
We include power limitation constraints as an additional exponential force that avoids nodes moving further apart from the maximum distance allowed by the maximum transmitted power available at the network nodes.
This serves as a measure for the average total power consumption normalized to the maximum power expenditure available to each terminal.
A set of design criteria for determining the optimal L/d that offers the maximum cooling power available from the dimpled fin for each specified dimple arrangement on two opposite fin walls is derived to assist the design activities using the dimpled fin array.
where I is the interference temperature and P is the maximum transmit power available at Rs.
