Sentence examples for maximum pore radius from inspiring English sources

The sample is characterized with maximum pore radius of 173.9 μm, and a minimum radius of 0.01 μm, and an average pore size of 41.6 μm.

Figure 5 is the pore size distribution of the sample indicating a bimodal pore size distribution with a maximum pore radius of 173.9 μm, and an average pore size of 25.4 μm.

AlKhidir et al. (2011) thought that the maximum pore radius of sample from the Permo-Carboniferous Shajara Formation is 173.9 μm with an average pore size of 41.6 μm using the high-pressure mercury injection.

The pore throat radius distribution, and pore structure evaluation parameters, such as average pore throat radius (Rm), threshold pressure (Pd), maximum pore throat radius (Rmax) and so on, can also be precisely extracted.

The maximum hydraulic pore radius was located at 11.5 and 27.5 Å for pure solids and found at 10 and 23 Å for solids doped by 0.75 mol% La2O3 and 9.5 and 30 Å for solids doped by 1.5 mol% La2O3 and 10, 16 and 26 Å for solids doped by 3 mol% La2O3 being calcined at 500 °C.

Initial replacement pressure is generally higher than 5 MPa, maximum pore-throat radius is lower than 0.2 μm, average pore-throat radius is lower than 0.05 μm, mercury injection saturation is below 50%%, and mercury withdrawal efficiency is below 30%%.

The initial replacement pressure is generally lower than 0.1 1 MPa, maximum pore-throat radius is lower than 1 μm, and average pore-throat radius is lower than 0.2 μm.

The maximum of average pore radius is 139.74 μm, while the minimum value is 103.7 μm.

Three sets of rscans with different minimum pore radii 0.055, 0.085, and 0.1 mm (maximum radius constant at 0.13 mm) are generated.

This work brings in a new feature of an "optimum" pore radius for maximum adsorption rate in polymeric systems.

The flux of methanol through the membrane and accordingly, the mean pore radius showed a maximum with the evaporation time, at the cloud point.