Sentence examples for maximum pore pressure from inspiring English sources
Maximum pore pressure was 100 kPa which generated in 30% silt content specimen.
Ideally to ensure equilibrium and to deter fluid flow into the wellbore, the applied mud pressure should, at least, match the maximum pore pressure within the reservoir.
It implies that the difference between the maximum pore pressure and vertical effective stress induced by the cnoidal wave and Stokes wave may reach 60 70%.
The results indicate that the maximum pore pressure increases with the increase of the prefabricated cracks' angles when the samples rupture in the hydraulic fracturing test.
Comparing the results between the strong uni-axial and bi-axial shaking, the maximum pore pressure ratios measured from the bi-axial test varied from 0.75 to 0.87, which were marginally larger than those obtained from the uni-axial test.
An empirical formula was proposed to predict the relative maximum pore pressure of fiber reinforced self-consolidating concrete exposed to fire by considering the moisture content, compressive strength and various fibers.
The mean and maximum pore pressures obtained by the simulation were compared to a series of experimental tests per ASTM C666, and results suggest the model may be used to predict satisfactory durability in the laboratory test.
Kick tolerance may also be defined in terms of the maximum allowable pore pressure at the next target depth (TD) or maximum allowable mud weight which can be tolerated without fracturing the previous casing shoe.
The maximum predicted pore pressure gradient observed in this study is 1.03 psi/feet in both synclinal and flank sections of Atharamura anticline.
Using this theory, the maximum excess pore pressure around the pile surface would be about three times the undrained shear strength of the soil (Su), which will lead to an excess pore water pressure value of 105 kPa.
During the strong uni-axial shaking of 0.3 g, the measured maximum excess pore pressure ratios ranged from 0.70 to 0.85 and a relatively small crest settlement of 5.8 mm (0.22 m prototype) was measured.
