Sentence examples for maximum pore diameter from inspiring English sources

Our criteria of a maximum pore diameter of 40 μm were best achieved via laser drilling.

The model's application is valid approximately up to the anodization time at which maximum pore diameter approaches cell size.

The membrane that presented the best performance had maximum pore diameter of 0.2 μm and permeability of 42.9 L/(m2.h.bar) for a simulated medium.

The N2 adsorption analysis indicates that the maximum Brunauer Emmett Teller surface area and Barrett Joyner–Halanda pore volume up to 1164.9 m2 g−1 and 1.5 cm3 g−1 respectively, and a maximum pore diameter of 4.9 nm.

We present herein a 2D analytical tool to estimate the strength of volcanic rock that can be used when the porosity, crystal fraction, and maximum pore diameter are known.

Transmission electron microscopy demonstrates that a proportion of the gold nanostructures exhibit structural features replicating the pore space of this ∼1.4 nm maximum pore diameter MOF, as well as regions that are larger in size.

The maximum pore throat diameter is generally about 0.31 5.13 μm with an average of 1.82 μm.

Results depicted in Fig. 5 show modality of the maximum pore throat diameter.

The maximum pore throat diameter, i.e., 10 µm has a low-frequency distribution in these measured core plugs indicating the 'tight' property of this carbonate reservoir.

It should be mentioned that some of the core plugs show very 'tight' property as the maximum pore throat diameter is smaller than 0.8 µm as shown in Fig. 4 (right).

A mercury intrusion porosimeter that can generate a maximum pressure of 414 MPa and evaluate a minimum pore diameter of 0.003 µm was used.