Sentence examples for maximum permeate flux from inspiring English sources

Maximum permeate flux was exhibited near 2 w/v% MPD.

The maximum permeate flux obtained from the current AGMD system is 71.1 kg/m2 hr.

Maximum permeate flux of 150 L/h/m2 was successfully obtained.

In states Ι and ΙΙ, the aim is to obtain the maximum permeate flux and the maximum rejection factor, respectively.

The maximum permeate flux and rejection factor were observed to be 2.42 L m−2 min−1 and 97.5%, respectively, that were acceptable.

Obviously, minimum and maximum permeate flux was observed when emulsifier and water content in feed were held at their maximum and minimum levels, respectively.

The permeation number (Eq. 5) expresses a comparison between the two main transport mechanisms involved that are the convective flux along the membrane axis and the maximum permeating flux achievable.

It should be also noted that the maximum permeated oxygen flux occurs at a higher value of 0.003 kg/s; however, this flow rate results in much higher heat loss and lower reaction temperature.

The maximum achieved rejection factor and permeate flux were 97.5% and 2.42 L min−1 m−2, respectively.

Membrane permeate flux decline was maximum at the first 12 h and thereafter remained steady at around 45 46 lm−2h−1 till the end of 60 h.

The experimental results demonstrate the existence of permeate flux minima and maxima in binary solvent mixtures.