Sentence examples for maximum peak power from inspiring English sources

And the hybrid starter generator's continuous power rating jumps to 8 kilowatts from 6.4; its maximum peak power remains unchanged.

The maximum peak power density of this device reaches to 0.16 μW/cm3 with a 15.8 Ω external resistance.

Q-switched pulses with maximum peak power of ≈10.4 kW, with energy of ≈0.5 mJ/pulse, were extracted with 30% extraction efficiency.

The results show that the optimal PTFE content, at which the maximum peak power density occurs, is about 5 wt% with a compression ratio of 30% for a GDL without an MPL coating.

The maximum peak power density of 1.38 mW cm−2 is obtained using 0.2 M glucose in 1 M KOH at 30 °C and it decreases with further increase in glucose concentration and temperature.

Animals in treatment group were exposed to 890- to 915-MHz EMF (217-Hz pulse rate, 2-W maximum peak power, SAR 0.95 w/kg) of a cellular phone for 12 h/day (11-h 45-min stand-by and 15-min spiking mode) for 30 days.

Mobile phones are low-powered RF devices transmitting maximum peak powers in the range of 0.6 2 W (ICNIRP 2008).

In fact, the most important result of this study is to understand that the ∑EOCs in the FAs must be such that in the next cycle they can sustain the energy during depletion to prevent too much power shifting to the fresh FAs and, thus, sending the maximum peak pin power, PPPmax, above its constraint.

where (R^{min}_{q}) represents the target QoS at S U q ; (g_{qn}^{ k)}) is the power gain of the interfering link S T q −P R (k); (overline {P}^{ k)}_{q}) is the maximum average interference power that SU q is allowed to inflict on PU k ; and (P^{peak (k)}_{qn}) is the maximum peak interference power in band n that SU q is allowed to inflict on PU k.

In contrast, the OMHP equipped with a larger oscillating magnet (i.e. 3.17 mm diameter) produced a maximum peak electrical power of 428 µW and an effective thermal conductivity of ∼2600 W/m K at 200 W of heat input.

At 400 W of heat input, the OMHP equipped with a smaller oscillating magnet (i.e. 1.59 mm diameter) produced a maximum peak electrical power of 21.9 µW and provided an effective thermal conductivity of ∼7000 W/m K.