Sentence examples for maximum operating conditions from inspiring English sources
The focus of the investigation is to study the aging behavior of these materials under maximum operating conditions (80 °C in water up to 16,000 h) and stagnation conditions (140 °C in air up to 500 h) typical for northern climate.
As in Part 1, the focus of the investigation is to study the aging behavior of these materials under maximum operating conditions (80 °C in water up to 16,000 h) and stagnation conditions (140 °C in air up to 500 h) typical for northern climate.
In "the worst case condition", the voltage for a 10 years lifetime of 25 nm thick BOX, is estimated to 14 V, which largely exceeds the maximum operating conditions for back-bias [+3 V, –3 V] in advanced FDSOI integrated circuits.
For a combination of both continuous and batch unit operations, performance tests shall be conducted at maximum representative operating conditions.
For continuous unit operations, performance tests shall be conducted at maximum representative operating conditions for the process, unless the Administrator specifies or approves alternate operating conditions.
For the standard TiAlN-coating, the maximum operating temperature conditions is therefore limited to 850 °C.
The temperature filed distribution and thermal errors of press machine are steady state simulated under the maximum loading operating condition.
Several factors that need to be considered during pipe selection include quality of the fluid to be pumped, required design capacity (initial minimum, average, and maximum flow rates), operating conditions (best-case and worst-case system head curves, maximum and minimum flow rates, submergence, and/or NPSH).
The algorithm is formulated by ascertaining the maximum or critical operating conditions of RVS machine subsystems at which these subsystems will fail through a dynamic simulation of the machine configured to beneficiate run-off iron ore and coal mineral particles using ANSYS® software.
The analysis has been conducted under two operating conditions, maximum efficiency mode and maximum output power mode.
Direct RO was selected and tests evaluated operating conditions, maximum concentration and flux decline.
