Sentence examples for maximum nuclear heating from inspiring English sources

Nuclear heating of the winding pack is lower than 0.3 mW/cm3 and the maximum nuclear heating of the TFC case is 0.4 mW/cm3.

The maximum nuclear heating of the winding at the inboard side of the superconducting TF coil was suppressed to be lower than 0.3 mW/cc.

For large superconducting magnet systems under the maximum nuclear heating of 200 W/m3, cable-in-conduit conductor (CICC) and alternative conductor designs are proposed with a robust design of cryogenic support posts.

Since the backwall is operating under a severe neutron irradiation of 50 dpa/year and a maximum nuclear heating rate of 25 W/cm3, thermo-structural design is one of critical issues in a target design.

Since the backwall is operating under severe neutron irradiation conditions, such as a damage rate of 50 dpa/year and a maximum nuclear heating rate of 25 W/cm3, thermo-structural design is one of the critical issues for target design.

The principal design criterion of the fundamental CNS design is the maximum increase of cold-neutron flux considering nuclear heating to be removed and safety problem.

Modest values of nuclear heating occur in the FIRE components.

There are two furnaces and two-zone central air for maximum heating and cooling efficiency.

Around 20% of the MCSs over Europe do not form during maximum heating.

They also say that repeated warnings should be issued throughout the heat wave and as the maximum heat index increases.

The maximum heat release rate reaches 64.32 kW and the maximum heat release is 13.74 MJ.