Sentence examples for maximum normal peeling from inspiring English sources

For the correlation cases studied, the maximum normal peeling stresses of critical solder joints correlate well with the mean impact lives measured during the drop test.

In this paper, a general stress-function variational method is formulated to determinate the interfacial shear and normal (peeling) stresses in ABJs in high accuracy.

This proposed approach consists of the maximum shear strain range, the normal strain range and the maximum normal stress on the maximum shear strain range plane.

The interlaminar shear stress is also accompanied by a singular stress field of the transverse normal (peel) stress near the edge.

These parameters are maximum interfacial peeling stress, maximum interfacial shear stress and a linear combination of interfacial peeling stress and shear stress.

The maximum relative normal displacement was 1.4 mm for a normal stress of 12 MPa.

A switch on the top varies between maximum and normal suction.

Since the sample is 30 mm wide and considering the maximum peel strength identified in Figure 6, peel strength per unit width of each adhesive joint was determined and is shown in Table 7.

This is as normal as skin peeling.

Table 8 Adhesive joint leather/PU: peel strength per unit width Surface treatments Maximum load (N) Peel strength per unit width (N/mm) All treatments 215 7.17 Untreated 29 0.97 PU: mechanical treatment 188 6.27 PU: primer 71 2.371

However, the maximum peel-off stress decreases with increasing thickness of the adhesive layer.