Sentence examples for maximum membrane flux from inspiring English sources

When the mass ratio of GAH NAG was 1 2, the maximum membrane flux was up to 42.3 L m−2 h−1.

The submerged membrane operates at trans-membrane pressure (TMP) of less than 300 mbar with a maximum membrane flux of 30 l/m2 h.

The activation energy was calculated from plot of the maximum membrane exit flux (Jamax) versus (1/T) at 300 rpm(Equation 3), as presented in Figure 4. Figure 4 Arrhenius plots for transport of mercury II) in liquid membrane.

The maximum trans-membrane flux increment in this study is obtained as 16.56% and the distillation ability potential is 4.1 kg/(m2 h) with high purity.

In that study, the TMP reached 0.25 bar in 3 days when the membrane flux was increased to 14 LMH, which is much higher than the maximum TMP observed here.

Figure 6 shows TMP variation (related to total and irreversible fouling at high flux and low flux) with membrane flux.

Membrane flux decline: This is because of the formation of a film of low permeability on the membrane surface.

The maximum backwash flux obtained was only about <11 LMH, which is much less than the <span class="lh lhl">membranes flux of 23 LMH under normal SWRO operating conditions.

However, in order to get the maximum ion flux per unit membrane area it is desirable to operate at the highest possible current density.

Consequently, the membrane demonstrated a maximum permeation flux of 1879 ± 80 g/m2 h coupled with an optimal separation factor of 1913 ± 69 in separating 90 wt% ethanol aqueous solution.

The permeation number (Eq. 5) expresses a comparison between the two main transport mechanisms involved that are the convective flux along the membrane axis and the maximum permeating flux achievable.