Sentence examples for maximum mass flow from inspiring English sources
The ratio height/radius, maximum mass flow rate and maximum power under the constraints of a fixed area and volume are determined.
The maximum mass flow rate reduced ratios of cabinet branch is 20.5% when the opening degree of electric expansive valve (EEV) of battery branch is 0.3.
Pinch analysis is first applied to find the grand composite curve (GCC) of the problem, which is then used by the algorithm to determine the maximum mass flow rate of steam that can be produced from process waste heat.
It was verified that for any given catalyst mass flow rate, there exists an optimum value for the catalyst to oil mass flow rate ratio, COR, for maximum mass flow rate production of gasoline, or any other desired product.
At the fixed total chimney length, the air mass flow rate also varied with the length ratio of the vertical to inclined section, and the maximum mass flow rate can be achieved by choosing the longest vertical length within the restriction of the building code.
From Equation (21), it can be deduced that the fluid mass flow rate increases as the collector tilt angle increases; the maximum mass flow rate occurs at θ = 90° for any given length of the pipe.
Results of the design variables study demonstrate that a higher maximum storage mass flow rates and a larger heat exchanger size are desired while limiting storage temperature should be as low as possible.
Complete conversion is predicted for a maximum CH4 mass flow rate of 0.70 kg s−1 and a desired outlet temperature of 1870 K, yielding a solar-to-chemical energy conversion efficiency of 42% and a solar-to-thermal energy conversion efficiency of 75%.
q o _ max refers to the maximum air mass flow rate through the air spring solenoid valve when the solenoid valve is fully opened.
The maximum difference in mass flow rate prediction is 1.2%.
The results obtained in this study are significant because they provide basic design guidelines for cavity and orifice, and can be used for optimization of the cavity and orifice shape for maximum velocity or mass flow rate.
