Sentence examples for maximum loss ratio from inspiring English sources

If we consider outdoor UEs and a maximum loss ratio equals, e.g., to 0.1, than we observe that FCS can bring the gain of roughly 20% in average bit rate (increase from 340 to 410 kbps).

The results show that these exergy indexes should be used integratively, and in the whole system the location of maximum exergy loss ratio is the compressor, while the location of minimum exergy efficiency and thermodynamic perfect degree is the ground heat exchanger, so that the compressor and the ground heat exchanger should be primarily improved.

Other NSP adopting a different QoS solution can adopt different QoS parameters (e.g., cell loss ratio, maximum cell transfer delay) and different measurement methods.

In parallel, a network emulator (NetEm) is used to modify network conditions in terms of packet delay, packet loss ratio and maximum throughput in the downlink.

(a) deadline miss ratio and (b) message loss ratio with maximum priority traffic separation between RT traffic and non-RT traffic; (c) deadline miss ratio and (d) message loss ratio with mixed priority traffic separation between RT traffic and non-RT traffic.

It was observed that the maximum loss energy performance was obtained at silica composition ratio Φ SP  = 25%.

However, the melting temperature of the irradiated powder of DBDPE for 2 h 30 min reduces by about 46.91 °C, the weight loss ratio of DBDPE is about 11% and the maximum degradation rate at the maximum weight loss ratio decreases by about 54.30 °C.

When the ground loss ratio δ was 1.68 %, the maximum and minimum principal stresses changed little during or after the shield tunnel was excavated.

Hydrothermal processing of Eucalyptus wood was performed at operation temperature of 181 °C, processing time or 37.5 min and solid water ratio of 1/6 to ensure a maximum loss of xylan recuperation with minimum cellulose fibre degradation.

The compound spring is shown to have a maximum loss factor which quickly reaches an asymptotic value as the tank/cylinder volume ratio increases.

(That percentage is the medical loss ratio).