Sentence examples for maximum loads were from inspiring English sources

Then, average values of critical maximum loads were extracted to be employed in FE analysis (Table 2).

Effective SPT yield and maximum loads were measured and correlated with yield and ultimate strengths of conventional tensile test.

Data provided by indentation tests at different maximum loads were used to estimate size-independent hardness and elastic modulus.

For each of the test hollow reinforced concrete bridge columns, the predicted and the measured maximum loads were in good agreement.

While LCF loading at a high stress of 900 MPa is seen to result in strain ratcheting, no distinct features on the fracture surface and different mechanisms of crack propagation from those obtained at lower maximum loads were observed.

The unidirectional strength is achieved by computing and optimizing the results of maximum deflection and maximum stresses at the location where maximum loads are applied.

The average of all maximum loads was 264.8 kN, approximately 2.6% greater than the nominal tensile force (260 kN) of a 15.2 mm diameter seven wire strand.

The deflection measurements obtained from the LVDTs at the L/4, 2L/4, and 3L/4 locations for the design, cracking, and maximum loads are tabulated in Table 4.

An investigation is carried out, on the possible fields of applicability of the trimaran ships; then models of global maximum loads are proposed.

To this end, different assumptions regarding the increase in the mean stress range, number of applied cycles and maximum loads are made.

Static and cyclic creep, cyclic and linear construct stiffness, maximum load to failure, and displacement at maximum load were determined at time zero.