Sentence examples for maximum loads obtained from inspiring English sources

As a result of using CTBs, the minimum and maximum loads obtained at feeders 15 and 39 are now larger than initially estimated (see Fig. 6a, b).

Maximum loads obtained from the test results were analyzed by means of Bazant's size effect law (SEL) and the results were compared with test data existing in the literature.

The most critical Tsai number, the structural reliability index and the sensitivities are obtained for each UDM design point, using the maximum load obtained from optimal design search.

The trend of the mean values of the maximum load, obtained from the shear tests, at varying exposure time in salt spray environment was recorded and it is reported in Figure 4.

To estimate the force applied in the clinical setting, the Exeter slap hammer was placed directly on the load cell of the biaxial hydraulic fatigue testing machine and the maximum load obtained from manual use by the authors was noted.

However, the maximum bending load obtained for the two investigated cases were treated by application of response surface method.

The maximum 6Li loading obtained that resulted in a transparent film was 4.36% by mass (6Li to polymer).

The maximum load was obtained in N. and the flexural strength (FS) was calculated in MPa using the following: FS = 3FL/(2BH^{2} ) where F is the maximum load (in Newtons); L is the distance between the supports (in millimeters); B is the width of the specimen (in millimeters) and H, the height (in millimeters).

Single synthetic macro fibres were embedded into 50 mm cube cement-mortar samples and subjected to 50% of the average maximum pull-out load obtained from the single fibre pull-out tests.

The maximum load capacity of the TRB was achieved when the radial load obtained was a maximum, while the stresses ratios of the two contacts in the outer raceway of the TRB were close to 25%.

Stiffness was obtained from the slope of the force-displacement curve and the ultimate load obtained was from the maximum force that the bone was able to resist.