Sentence examples for maximum load by from inspiring English sources

Both phenomena, though, are found to reduce the maximum load by less than 6%.

Values in MPa were obtained by dividing maximum load by the bonded surface area of each specimen.

The push-out bond strength values (MPa) were calculated by dividing the maximum load by the lateral area of the GFP.

The compressive strength was calculated from the maximum load by the following equation: S = F / A. where S is the compressive strength (in megapascals), F is the maximum compressive load (in newton), and A is the surface area of the β-TCP scaffold perpendicular to the load axis (in square millimeters).

This procedure of raising the maximum load by 20 N following a test where the orthodontic bond has not failed and lowering the load by the same fixed amount following a bond failure was continued for each following specimen until all ten specimens in each group were evaluated.

The three-point bending test of the femur demonstrated that Dex treatment significantly reduced energy to maximum load by 34.4% and energy to fracture load by 46.3% compared to the Con treatment.

Using improved area correction functions, by varying the maximum load, and by separating the instrumental broadening from the measured hardness profiles, it was possible to significantly improve the sensitivity and the resolution of the SACS.

The maximum load shared by the teeth is much greater than the ones shared by pins and rollers.

When carrying the maximum load recommended by Ford -- five passengers and 226 pounds of cargo -- a 1998 four-door Explorer has a stability score of 1.01.

The maximum load, divided by the initial cross-sectional area of the sample, is called the ultimate tensile stress (UTS).

However, the maximum load sustained by the GFRP-HSC specimens under eccentric axial load was 10 12% lower than the maximum load sustained by the steel-HSC specimens.