Sentence examples for maximum load applied from inspiring English sources

Finally, it is shown that elastic recovery of the silk membranes is an increasing function of the maximum load applied.

Fig. 5 Stiffness by allograft: LGA had a median stiffness between 50 and 75%% of the maximum load applied calculated in 57.86 N/mm (42.68 93.69 N/mm), and CGA in 54.23 N/mm (36.66 61.02 N/mm) in the.

Median stiffness calculated between 50 and 75%% of the maximum load applied was 57.86 N/mm (range 42.68 93.69 N/mm) in the LGA and 54.23 N/mm (range 36.66 61.02 N/mm) in the CGA with no statistical differences being observed between the groups (p = 0.2) (Fig. 5).

The maximum load applied to the WMTA was recorded in Newton before the occurrence of dislodgement.

With this method, the NZ obviously depends on the maximum load applied and thus the ROM.

Both the maximum load applied, and thus the loading history, and the point in time at which the residual displacement is measured, are arbitrarily chosen.

The material softening induced by cyclic loadings appeared to depend on the maximum loading applied.

Typical maximum loads applied are of the order of 10000 kN.

Also in this case the length of overlap between the plates has been set at 20 mm and the maximum loads applied to the specimens are 700 N for t1 thickness and 900 N for t2 thickness.

The maximum allowable load applied to the sensor is 31.8 N based on an allowable stress for AT-cut quartz crystals of 150 MPa.

The results obtained have shown that the tested elements are characterized by: (i) high values of the maximum horizontal load applied to the structural systems (higher than the applied vertical load); (ii) residual bearing capacity with respect to the vertical loads, also when large lateral deformations are imposed; and (iii) high ductility.