Sentence examples for maximum linear rate from inspiring English sources

The ΔA450 per minute was used as the maximum linear rate for both the test and blank groups.

The change in A340 nm per minute was determined using the maximum linear rate for both the test and the blank.

The decrease in ΔA265 nm was recorded for approximately 5 min. The ΔA265 nm was obtained using the maximum linear rate for both the test and control.

The rates of Ca2+ transport during the reverse mode of NCKX4 operation (during Li0.25K perfusion) were determined using linear regression of the initial maximum linear rate of change of fura-2 ratio for each pulse.

The fuel pins were irradiated at the maximum linear heating rate of ∼470 W cm−1 in the B14 test.

In this case, the maximum linear growth rate corresponds to the modes with (vec {q}=pm,sqrt {frac {hat {nu }_{y}}{2bar {K}}}vec {1}_{y}) and instability occurs at (bar {alpha }= frac {hat {nu }_{y}^{2}}{K}}r {K}}).

In addition, it has been confirmed that the ARR core conforms to the set design requirements; the void reactivity, the maximum linear heat rate, and the shutdown margin of reactivity control system.

The maximum linear power rating was limited to about 25 kW/m during the currently reported initial testing phase, as compared to the design value of 35 kW/m to be aimed at during subsequent cycles at Halden.

The predicted average maximum linear N uptake rate ranged from 0.25 to 0.38 g N/m2/day and driven by direct and indirect effects of solar radiation input.

The maximum linear heat generation rate is 50.6 kW/m, the average discharged burnup is 38.1 GWd/tU, and the CVR is negative throughout the cycle.

The numerical results show that all the design criteria are fulfilled by the maximum cladding surface temperature of 656 °C with 500 °C average core outlet temperature, maximum linear heat generation rate of 37.4 kW/m and positive water density as well as shutdown margin of 1.45%dk/k.