Sentence examples for maximum joint strength from inspiring English sources
It was found that the maximum joint strength was 86% of the bulk material strength.
The results exhibited that, the maximum joint strength was achieved by the tool of cylindrical pin profile having 8 mm pin diameter.
The maximum joint shear strength (83 MPa) was obtained with 10 wt% Ti and 5 vol% Mo, which had exceeded 90% of the porous Si3N4 and was 56% higher than the joint brazed without Mo particles.
The regression equation is formulated for two conditions of the work pieces to obtain the maximum welding joint strength and it is verified by the confirmation test.
A maximum increase in joint strength of 160% on average above the unanchored control joints was achieved.
When a continuous film of 100 nm is used on a flat HDPE surface and the maximum metallization strength is only reached, the standard deviation of the joint strength decreases to only 6%%.
It was found that joint strength increased with the overlap length up to an apparent maximum of approximate 200 mm.
They would enhance Europe's joint strength and security.
Those strengths are: collapse resistance, pipe body yield strength, joint strength, and internal pressure resistance (burst strength).
The perforated steel joints show a 175% increase of joint strength comparing to non-perforated joints.
