Cell/substratum distance d at each pixel was derived from illumination intensity I with the low incidence approximation 26, 40: 2where λ is the light wavelength in aqueous medium, and I m and I M are, respectively, the minimum and maximum intensities corresponding to d = 0 and d = λ/4 ≈ 100 nm, respectively.
The films show the maximum intensity peak corresponding to the (222) orientation around 30.581° which is reported as favored direction of the grain growth observed for polycrystalline ITO films with higher oxygen content [29].
By introducing a slow modulation to an ordinary interferometer, accurate measurement of the maximum intensity change corresponding to the small vibration at the most sensitive quarter-wavelength point can be achieved by measuring the envelope amplitude of the modulated vibration signal.
As a result, the maximum scattering intensity corresponding to the highest number of assemblies is obtained if the grafted copolymer in the aggregate is in excess.
On the other hand, when the height of the entering ion beam is 0.4 mm, the maximum intensity is 44, the corresponding peak position is 6.95, the half peak positions are -7.09722 and -6.70556, and the resolution is 6.95/ 7.09722-6.70556)=17.7.
Drosophila images were first divided by the fluorescein image with corresponding maximum intensity and then multiplied by the maximum intensity of the fluorescein image.
Then, the mosaics were processed separately using ED-OMAG and MUSIC (for quantification) and their corresponding maximum intensity projection maps were stitched together to form the entire ear pinna en-face angiogram.
The results show that the displacement corresponding to maximum intensity observed at different concentrations is a function of the refractive index of the medium and there is a linear relationship between them.
Potentials were recorded from scalp electrodes (vertex to mastoid ipsilateral to the stimulated ear) in response to 2000 trials of alternating polarity clicks presented monaurally (TDH-50 transducer earphone) at a maximum intensity of 125 dB SPL (corresponding to 90 dB nHL, referred to the psychoacoustical threshold of subjects with normal hearing).
Stimuli consisted of 0.1 ms rarefaction and condensation clicks, delivered separately in the free-field by means of two high frequency drivers (Electro-Voice DH1A/2MT 16 Ω) mounted on a single polyurethane horn (Electro-Voice HP420) with a maximum intensity of 120 dB SPL (corresponding to 90 dB nHL relative to the psychoacoustic threshold of subjects with normal hearing).
