Sentence examples for maximum hydrogen yield from inspiring English sources

Hence, suitable pretreatment of crude glycerol is recommended for maximum hydrogen yield.

The maximum hydrogen yield of 0.55 was obtained with an arc frequency of 200 Hz and an O/C ratio between 0.20 and 0.25.

The maximum hydrogen yield (MHY) obtained was 0.66 mol H2/mol total monomeric sugars and productivity of 3551 μmol/1010 cfu were obtained from engineered Escherichia coli.

Increasing liquid metal temperatures resulted in increasing hydrogen yields, leading to a maximum hydrogen yield of 78% at 1175 °C and 50 mln/min methane volume flow rate.

The maximum hydrogen yield of 80% was obtained with 50% of the catalyst in the composite pellets and lignite Boundary Dam (BD) coal at 700 °C.

In this case, the total soluble sugar obtained in the hydrolysis stages was 562.1 ± 6.9 mg/g-TVS, and the maximum hydrogen yield from cornstalk by anaerobic mixed microflora was 209.8 ml/g-TVS.

Maximum hydrogen yields of 3.48 ml H2/g COD and 2.18 ml H2/g COD were observed in sterilization of pretreated restaurant food and raw starch wastes, respectively.

Maximum hydrogen yields of 3.48 and 2.18 ml H2/g COD were observed on sterilization of pretreated restaurant food and raw starch wastes, respectively.

The maximum hydrogen yields of 64 cm/g of wheat feed dry weight were produced in batch mode.

Experimental optimization of process parameters (60 °C, pH 6.5 and 10 g/L) gave the maximum hydrogen production and yield of 3985 mL/L and 2.7 mol/mol glucose respectively in the batch system which is higher than the reported value on UASB.

The maximum butanol concentration was 12.1 g L−1, with a yield of 0.34 mol butanol/mol glycerol, and the maximum hydrogen production was 5.18 L H2 L−1, with a yield of 0.41 mol H2/mol glycerol (Fig.  3).