Sentence examples for maximum heating load from inspiring English sources

Moreover, the maximum heating load and the corresponding COP as well as the maximum COP and the corresponding heating load are obtained.

The influences of some design parameters, including heat-capacity rate of the working fluid, heat-reservoir temperature-ratio and heat-exchanger inventory on the optimal distribution of heat conductance, the maximum heating load and the maximum heating-load density are indicated by numerical examples.

To justify the heat pipe application as an energy saver, numerical computations have been done on typical days in the month of April from which maximum heating load occurs and an appropriate heat pipe set was theoretically designed.

The optimal relation between the ecological criterion and the COP (coefficient of performance), the maximum ecological criterion and the corresponding COP, heating load and entropy production rate, as well as the ecological criterion and entropy-production rate at the maximum heating load are derived using finite-time thermodynamics.

Conventional-type water/lithium-cooled divertor targets with a maximum heat load of ∼10 Mwere were chosen.

The model is applicable from minimum to maximum heat load of the furnace.

Respiration rate (78 breaths/min) and skin temperature (35.4°C) during maximum heat load were not affected by treatment.

A conventional type of water or Li cooling divertor targets with maximum heat load of ∼10 MW m−2 was chosen.

The results confirm the stable operation of the micro-LHP for the target heat load amount up to a maximum heat load of 11 W.

The maximum heat load of boiling pool is 200 W (heat flux 41.3 W/cm2) while maintaining the heating wall temperature within allowable upper limit of 90 °C.

For the designed loop heat pipe prototype, the minimum value of 0.15 °C/W for total thermal resistance was observed at maximum heat load of 500 W.